600WD

The Series 600WD Water Detection control panel is designed to detect Water Leakage either by a Continuous water detection Cable or a Point Detection probe. The panel is special designed for Air conditioning, Sprinkler systems, heating systems & Water cooled processors used in today’s Electrical Communication and Computer Systems/Networks.

Connection to the control is made to either the point/cable detection via a simple two core leader cable. Upon Detection the appropriate Zone LED’s will illuminate, the internal alarm will sound and the alarm auxiliary contacts will operate. Disconnection of the Probes or a break in the water detection cable is indicated by the appropriate Zone Fault LED, an internal fault buzzer will also sound. Each Zone will require a Connection Box and an EOL plug.

Available as a standard 2 zones each with an internal power supply. An internal 1.0 amp 24v power Supply is fitted. The panel has space for up to 7 amp/hr SLA batteries. The panel is housed in an attractive metal enclosure with all user controls and indications located on the Front fascia Together with clear operating instructions. A Bezel can be fitted to the back box to enable the control panel to be flush mounted. Special colours and finishes are available to special order.

1000WD

The Series 1000WD range of Water Detection control panels are designed to detect Water Leakage either by a Continuous water detection Cable or a Point Detection probe. The panels are special designed for Air conditioning, Sprinkler systems, heating systems & Water cooled processors used in today’s Electrical Communication and Computer Systems/Networks.

Connection to the control is made to either the point/cable detection via a simple two core leader cable. Upon Detection the appropriate Zone LED’s will illuminate, the internal alarm will sound and the alarm auxiliary contacts will operate. Disconnection of the Probes or a break in the water detection cable is indicated by the appropriate Zone Fault LED, an internal fault buzzer will also sound. Each Zone will require a Connection Box and an EOL plug.

Available in a standard range from 2 to 24 zones each with an internal power supply. On panels Up to 12 zones a 1.25 amp is fitted and up to 24 zones a 3 amp. The panel has space for up to 7 amp/hr SLA batteries. The panels are housed in an attractive metal enclosure with all user controls and indications located on the Front fascia Together with clear operating instructions. A Bezel can be fitted to the back box to enable the control panel to be flush mounted. Special colours and finishes are available to special order.

Water Detection Cable

Available in either 5 or 10 metre lengths. The WD Cable is a flexible cable which can continuously monitor a large area. When a small amount of water is absorbed by capillary action, thus triggering an alarm. The Cable will dry out in around 20—30 minutes for use again. Each cable comes with Plug/Socket at each end thus allowing longer runs simply by plugging lengths of the WD cable together.

Water Detection Probe

This adjustable height probe is simply screwed to the floor and adjusted to give required Detection level .A alarm red LED is mounted on the top of the probe. The probe is connected to the control panel via a Flexible cable which plugs into the probe. A bracket is available for mounting onto the side of an AC unit drip tray.