AX-WLD-DTA



THE AX - WLD - 230 - A IS A SINGLE ZONE DRIP TRAY WATER LEVEL ALARM MODULE WHICH CAN BE SUPPLIED IN AN ENCLOSURE. THE MODULE CAN HAVE A TOTAL OF 200 METRES OF CABLE CONNECTED (CABLE AND HEADER). THE SENSITIVITY IS ADJUSTED TO ENSURE THE FALSE ALARMS ARE NOT GIVEN. A LOUD ALARM BUZZER IS BUILT IN.

AX-WLD2



THE AX - WLD2 IS A RANGE OF SINGLE AND DUAL ZONE WATER LEAK DETECTION MODULES DESIGNED FOR DIN - RAIL MOUNTING. THE WATER LEAK MODULE CAN HAVE A TOTAL OF 200 METRES OF CABLE CONNECTED TO EACH INPUT (CABLE AND HEADER). A RELAY OUTPUT PROVIDES AN ALARM SIGNAL TO A REMOTE ALARM ANNUNCIATOR OR A BMS SYSTEM. THE SENSITIVITY IS ADJUSTABLE TO ENSURE FALSE RETURNS ARE NOT GIVEN. AN OPTIONAL ALARM BUZZER CAN BE INCORPORATED.

AX-WPS



The AX-WPS water leak point sensor is used to detect water at a localised point, and are used in conjunction with the AX-WLD2 range of detection modules.

AX-WCS



The AX-WCS range of cable sensors are typically used to detect water leaks usually under floors, and are used in conjunction with the AX-WLD2 range of detection modules.

N.B. The cable excitation used from the AX-WLD2 is an isolated AC signal which ensures the detectors will not be subject to oxidation or erosion over time, avoiding the degradation problems associated with DC systems.

AX-WRS



The AX-WRS1 range of rain sensors are used to detect rain.  The surface of the detector can be heated to avoid false detection alarms resulting from dew forming.  The detector can be swivelled on the mounting bracket and is help in place by a wing-nut.

This device cannot be connected directly to a BMS controller, the AX-WLD2 module must be used.