Resikom Logo
Products
# #
Alarmtronic
Products
#
#
Products
Bartec
Axio
Products
Control Equipment CMR Electrical
Products
Detek #
Products
# #
Resikom Logo Early Prevention, Enviromental & Building Solutions
Resikom Limited
    Resikom Limited
Liquid Leak Detection - Products - Detek - Sensors/Detectors
Resikom What Do We Protect? Resikom Products Resikom What Can We Detect?
Resikom System Identification Resikom Frequently Asked Questions    
Resikom Alarmtronic Resikom Andel Resikom Aqualarm Resikom Aqualeak Resikom Aquentis
Resikom Axio Resikom Bartec Resikom Control Equipment Resikom CMR Electrical Resikom Detek
Resikom Hydrosense Resikom TraceTek Resikom TTK safety
Resikom Water Detection Controllers Resikom Sensors/Detectors

Sensing Cable

Sensing Cable

Sensing cable or tape sensors are suitable for general protection under false floors, or can be fastened directly to pipe work enabling coverage in ceiling void areas. The cables can be connected together, up to 100m, to cater for larger areas. For each zone a "start of line" and an "end of line" module is required. The sensor comprises of high flexibility conductors insulated by Helagaine monofilament braiding.

Sensor Pad

Sensor Pad

Sensor pads will detect a few drops of liquid and can be either face up or face down for locations under vulnerable points or general coverage. For face down sensors a cover is available. The sensor is constructed from glass fibre with an anti-corrosive nickel plated surface.

Probe Sensor

Probe Sensor

These are the least sensitive and are often employed as a water level sensor. In general use the sensor is enclosed in a protective cover, which also provides a means of fixing. The probe is designed for vertical mounting at skirting level, though maybe mounted in voids or sumps. A screw adjustment is available to allow for variance in allowable water level.

Float Switch

Float Switch

To be used in water tanks to provide either high or low level alarms. Versions can be supplied in an enclosure to allow mounting in voids or on roofs.

High Temperature Detector

High Temperature Detector

The Aqualarm detector is capable of sending an alarm signal to the control panel for two separate alarm points . The alarm points are entered into the detector via a simple plug-in programmer (supplied). These points can be changed by the user as required.

The detector is capable of being monitored by any of the Detek control panels. The detector is not available as a 24V standalone unit.

Humidity Level Detector

Humidity Level Detector

The Aqualarm humidity detector sends an alarm signal to the control panel should the humidity set level be exceeded. The level required is set via an integral scale adjuster. Levels can be set between 30% and 100%.

The detector is capable of being monitored by any of the Detek control panels. The detector is not available as a 24V standalone unit.

Building Solutions
Fire Alarms
Resource Centre
SAFE Contractor APPROVED Committed to CSCS TIVA
SSIP
0845 686 6066
0845 686 6067
info@resikom.com
 
Copyright © 2010 - Resikom Limited
Designvent Limited