AquiTron AT-LDM-SM

The AquiTron AT-LDM-SM is a low cost single zone alarm panel designed for protecting small areas using the full range of AquiTron and TraceTek sensors.  A single volt free relay for leak is available for connection to building management or other alarm systems.

TraceTek TTC

The TraceTek TTC is a single zone module designed for protecting small areas.  A range of volt free relays for leak and trouble are provided for connection to either a building management or other alarm systems.  The controller is fully compatible with all AquiTron and TraceTek detectors.  Also available is a mounting kit to enable the module to be clipped into enclosures using din rails.

AquiTron AT-FLSH-P

The AquiTron AT-FLSH-P is a self contained, battery powered unit with a visual alarm flasher and a test circuit.  The unit is designed for applications including fuel tanks, buried valves or manifolds, sumps and any areas using the TraceTek TT5000 fuel sensing cable and TT5001 solvent sensing cables.   Units are also available for use with TraceTek TT1000 water sensing cable, TT3000 acids & aqueous chemical sensing cable and TT7000 sulphuric acid & nitric acid sensing cables.

AquiTron AT-SZA

The AquiTron AT-SZA is a single zone alarm panel designed for protecting small areas using the full range of AquiTron and TraceTek sensors.  A range of volt free relays for leak and cable break are available for connection to building management or other alarm systems.

AquiTron AT-MZA

The AquiTron AT-MZA is a multi-zone alarm panels are designed for protecting multiple areas using the full range of AquiTron and TraceTek sensors.  The control panel starts as a 2 zone base unit and expands to 8 zones by adding expansion cards.  Each zone works independently of each other meaning that more than one leak, fault or combination of both can be reported.  A range of volt free relays for leak and cable break are available for connection to building management or other alarm systems.

TraceTek TTDM-128

The TraceTek TTDM-128 is a distance read system designed for large buildings with a capability of monitoring 1500 metres or if networked 128 times 1500 metres.  With a LCD display the system can display up to the minute information as well as events history capable of 1500 events all time and date stamped.  The controller is compatible with all AquiTron and TraceTek detectors.  A range of volt free relays are provided for leak, trouble and fault.  A self test facility is provided for regular weekly tests.

TraceTek TTSIM-1

The TraceTek TTSIM-1 is designed to be connected to either a TraceTek-128 network or other monitoring equipment such as Building Management System, PLC or DCS.  The controller enclosure is designed to easily clip onto a din rail meaning easy integration into other equipment enclosures.  The controller is capable of monitoring up to 1500 metres and fully compatible with all AquiTron and TraceTek detectors.

TraceTek TTSIM-1A

The TraceTek TTSIM-1A is designed to be connected to either a TraceTek-128 network or other monitoring equipment such as Building Management System, PLC or DCS.  The controller enclosure is designed to easily clip onto a din rail meaning easy integration into other equipment enclosures.  The controller is capable of monitoring up to 150 metres and fully compatible with all AquiTron and TraceTek detectors.  A relay is provided which can be programmed to be energized or de-energized and for leak only or leak and fault conditions.  The controller is also able to be connected using Modbus, OptoMux and Jonson Controls Metasys.

TraceTek TTSIM-2

The TraceTek TTSIM-2 is designed to be connected to either a TraceTek-128 network or other monitoring equipment such as Building Management System, PLC or DCS.  The controller enclosure is designed to easily clip onto a din rail meaning easy integration into other equipment enclosures.  The controller comes with a distance reading display and can read in either feet or metres.  The controller is capable of monitoring up to 150 metres and fully compatible with all AquiTron and TraceTek detectors.  A relay is provided which can be programmed to be energized or de-energized and for leak only or leak and fault conditions.  The controller is also able to be connected using Modbus, OptoMux and Jonson Controls Metasys.

TraceTek TTA-SIM

The TraceTek TTA-SIM is designed to be either a standalone unit or as part of a 128 module network.  The controller comes in two versions either with or without a distance reading display.  Each version is capable of monitoring up to 150 metres and is fully compatible with all AquiTron and TraceTek detectors.  A relay is provided which can be programmed to be energized or de-energized and for leak only or leak and fault conditions.  The controller is also able to be connected using Modbus, OptoMux and Jonson Controls Metasys.