TraceTek TT1000 Water Sensing Cable

The TraceTek TT1000 Water Sensing Cable is designed using patented polymer technology which allows detection at any point along the sensors length.  The sensing cable comes in modular lengths of 1m, 3m, 5m, 7.5m and 15m with factory pre-terminated plastic connectors.  The sensing cable can be wetted and dried in seconds multiple times.  The sensor is fully compatible with all AquiTron and TraceTek control panels.

TraceTek TT1100-OHP Water Sensing Cable For Suspended Pipes

The TraceTek TT1100-OHP Water Sensing Cable For Suspended Pipes is designed using patented polymer technology which allows detection at any point along the sensors length.  The sensing cable uses the same technology as the TT1000, but is supplied with an absorptive synthetic fibre braid designed to wick water along the cable even when the water leak is dripping from a single small pin hole or crack. The sensing cable comes in modular lengths of 1m, 3m, 7.5m, 15m, 30m, 50m and 100m with factory pre-terminated plastic connectors or a bulk reel with no connectors.  The sensing cable can be wetted and dried quickly.  The sensor is fully compatible with all AquiTron and TraceTek control panels.

TraceTek TT3000 Acids & Aqueous Chemical Sensing Cable

The TraceTek TT3000 Acids & Aqueous Sensing Cable is designed using patented polymer technology which allows detection at any point along the sensors length.  The sensing cable comes in modular lengths of 1m, 3m, 5m, 7.5m and 15m with factory pre-terminated metal connectors.  The sensing cable can be wetted and dried in seconds multiple times.  The sensor is fully compatible with all AquiTron and TraceTek control panels.

TraceTek TT5000 Fuel & Oil Sensing Cable

The TraceTek TT5000 Fuel & Oil Sensing Cable is designed using patented polymer technology which allows detection at any point along the sensors length.  The sensing cable comes in modular lengths of 0.3m, 1.5m, 3m, 4.5m, 7.5m, 15m and 30m with factory pre-terminated metal connectors or a bulk reel with no connectors.  The sensing cable can be only be used once, so when activated it must be replaced.  The sensor is fully compatible with all AquiTron and TraceTek control panels.

TraceTek TT5001 Organic Solvent Sensing Cable

The TraceTek TT5001 Organic Solvent Sensing Cable is designed using patented polymer technology which allows detection at any point along the sensors length.  The sensing cable comes in modular lengths of 0.3m, 1.5m, 3m, 4.5m, 7.5m, 15m with factory pre-terminated metal connectors.  The sensing cable can be only be used once, so when activated it must be replaced.  The sensor is fully compatible with all AquiTron and TraceTek control panels.

TraceTek TT7000 Sulphuric Acid & Nitric Acid Sensing Cable

The TraceTek TT7000 Sulphuric Acid & Nitric Acid Sensing Cable is designed using patented polymer technology which allows detection at any point along the sensors length.  The sensing cable comes in modular lengths of 1m, 3m, 7.5m, 15m with factory pre-terminated metal connectors or a bulk reel with no connectors.  The sensing cable can be only be used once, so when activated it must be replaced.  The sensor is fully compatible with all AquiTron and TraceTek control panels.  An outdoor version called TT7000-HUV is also available which is supplied with a UV resistant polyester woven fabric sun shield to provide extra UV protection.

AquiTron AT-Probe Water Probe

The AquiTron AT-Probe is designed to detect water in a single spot where it is not possible to use sensing cables.  They can be mounted vertically or horizontally and are protected by a metal guard plate.  The AquiTron AT-Probe is fully compatible with all AquiTron and TraceTek control panels.

AquiTron AT-Opsen Optical Probe

The AquiTron AT-Opsen is designed to detect hydrocarbons in a single spot where it is not possible to use sensing cables.  Remote sensors are also available.  They are operated by an external power supply providing 12Vdc.  The AquiTron AT-Opsen is fully compatible with all AquiTron and TraceTek control panels.

AquiTron AT-600A Immersion Probe

The AquiTron AT-600A is designed to detect conductive liquids in a tanks, pipes, vessels, overflows and vent pipes.  They come with a ¾” BSP male thread connection.  The AquiTron AT-600A is fully compatible with both AquiTron and TraceTek control panels.

TraceTek TT-Mini-Probe

The TraceTek TT-Mini-Probe is designed to detect leaks in sumps, pits, wells or under the insulation on pipes.  They are manufactured from chemical and corrosion resistant materials to withstand exposure to water and a wide range of harsh chemicals.  The TraceTek TT-Mini-Probe is fully compatible with all AquiTron and TraceTek control panels.

TraceTek TT-FFS Fast Fuel Sensor

The TraceTek TT-FFS Fast Fuel Sensor is a fast acting probe designed to detect hydrocarbon fuel floating on water, spreading on a flat surface or collecting in a sump.  The probe ignores water, but detects a thin film of fuel floating on the surface.  The TraceTek TT-FFS is fully compatible with all AquiTron and TraceTek control panels.